PEq50-30 IP HD Explosion proof PTZ camera, Pearmain Exproof high
speed dome camera, 30x optical,12x digital zoom
304 or 316L Stainless steel material
it could automatically identify camera modules.
Multiple protocol support
360° continuous pan rotation, movement speed up to 300°/sec
Indoor and outdoor for all weather use
Support High definition output(1920x1080@30p)network encode output.
PEQ50 is an ex-proof monitoring ptz camera, with advanced technique
and matured quality as its base, has been a successful product in
market in the area of explosive and flammable for monitoring.
Integrated structure design, with no cable between pan/tilt and
camera, turning at both pan/tilt and all direction.
It could automatically identify camera modules, including
Sony,samsung, etc., all direction pan/tilt, and decoders inside,
multiple communication protocol to response different orders.
100VAC~240VAC Supply voltage.
With alterable pan and tilt speed. Pan/tilt speed depends on lens
focus and swivel range, 360° continuous panning, 90° tilting, 0.1°
to 300°/s and maximum 400°/s on base of preset.
128 presets, including horizontal and vertical position of pan/tilt
as well as focus position of lens.
It could work under -20℃ to +60℃ long-time stably.
Easy installation and maintenance, fixed brackets, base, pole or
lattice tower for mounting.
Ex-marking: ExdⅡCT6 / DIP A20 TA, T6
Material: Stainless steel 304 or 316L option.
Pan: 360° continuous pan rotation
Tilt: +90° ~ -90°
Pan speed: 0.1°/S ~ 300°/S
Tilt speed: 0.1°/S ~ 120°/S
Preset speed: 400°/S
Ship weight: 15Kg, Unit weight: 12Kg
Mounting: Fixed bracket, base & pole
Input voltage: 100VAC~240VAC, 50/60Hz
Communication rate: Multiple, to be set
Preset accuracy: ≤ 0.1°
Connection: 6-core for power, control and video.
Air pressure: 86～106KPa
|Imager||1/2.8 Type Exmor CMOS Sensor|
|Picture elements||2140K pixels|
|F= 4.3 mm (WIDE) to 129 mm (TELE), F1.6 to F4.7|
|Zoom movement speed||Optical WIDE - Optical TELE|
|4.6 sec (Focus Tracking ON)|
|3.2 sec (Focus Tracking OFF)|
|Optical WIDE - Digital TELE|
|6.7 sec (29.97p/59.94p mode)|
|7.1 sec (25p/50p mode)|
|Digital WIDE - Digital TELE|
|2.2 sec (29.97p/59.94p mode)|
|2.7 sec (25p/50p mode)|
|Focus Movement time||∞ to Near 1.1 sec|
|Digital zoom||12× (360× with optical zoom)|
|Angle of view (H)||Approx. 63.7 degrees (wide end),|
| ||approx. 2.3 degrees (tele end)|
|Min. working distance||10 mm (wide end), 1200 mm (tele end)|
|Min. illumination (Typical value)||0.35 lx (1/30 sec, 50%, High Sensitivity mode ON)|
|1.4 lx (1/30 sec, 50%, High Sensitivity mode OFF)|
|0.05 lx (1/4 sec, 1/3 sec, 50%, High Sensitivity mode ON)|
|0.19 lx (1/4 sec, 1/3 sec, 50%, High Sensitivity mode OFF)|
|0.013 lx (1/30 sec, 50%, High Sensitivity mode ON)|
|0.05 lx (1/30 sec, 50%, High Sensitivity mode OFF)|
|0.002 lx (1/4 sec, 1/3 sec, 30%,High Sensitivity mode ON)|
|Recommended illumination||100 lx to 100,000 lx|
|S/N ratio||50 dB (Weight ON)|
|Back light compensation||ON/OFF|
|Electronic shutter speed||1/1 sec to 1/10000 sec (22 steps)|
|White balance||AUTO, ATW, Indoor, Outdoor, One Push WB, Manual WB, Outdoor Auto,
Sodium Vapor Lamp (Fix/Auto/Outdoor Auto)|
|Gain||Auto/Manual (0 to 28 step)|
| ||Max. Gain Limit (6 to 28 step)|
|Wide dynamic range||ON/OFF|
|Noise reduction||ON/OFF (level 5 to 1 / OFF, 6 steps)|
|Aperture control||16 steps|
|Serial interface||VISCA protocol (CMOS 5V), 9.6 kbps, 19.2 kbps, 38.4 kbps,
115.2kbps, Stop bit, 1 bit|
|Video Output||HD: Analog component (Y/Pb/Pr), Digital (LVDS), Analog SD: VBS|
|Storage temperature/Humidity||-20 °C to +60 °C (-4 °F to +140 °F)/20% to 95%|
|Operating temperature/Humidity||-5 °C to +60 °C (23 °F to +140 °F)/20% to 80%|
it is very good for the market in the area of explosive and
flammable for monitoring, like mining, petrol, etc.